Boulder 2010 Spécifications télécharger pdf (Page 22)

2-7

OPERATION

POLARITY

NOTE: Often polarity is mistakenly called phase. As phase indicates

any angle between two channels from 0 to 360 degrees, the correct term

of polarity is preferred to indicate the 180° phase change, or inversion,

available in the 2010 Preamplifier.

To activate a polarity change only in one channel, start by pressing

either the L POLARITY or R POLARITY pushbuttons. “POL NORMAL”

will show in the right display. If you want to change the polarity in

the left channel, press the L POLARITY pushbutton while “POL...” is

displayed. “POL L INVRTD” will show in the right display and the

output polarity of the left channel main outputs will be inverted.

Similarly, you may change the polarity only in the right channel, by

pressing R POLARITY while “POL...” is displayed. “POL R INVRTD”

will show in the right display and the output polarity of the right

channel main outputs will be inverted.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 64 65

Pas de commentaire

Boulder 2010 Spécifications Page 22