Boulder 2010 Spécifications télécharger pdf (Page 43)

4-9

MAIN OUTPUTS POLARITY

The polarity of the main outputs may be adjusted to match the

power amplifiers used. If you are using a Boulder 100, 250 or 500 series,

this should be set to “PIN 3 HIGH.” For Boulder series 2000 amplifiers,

it should be set to “PIN 2 HIGH.” For other brands, consult the product’s

owners manual.

From “PROGRAM MODE” press the L POLARITY pushbutton.

”MAIN OUT PL?” will show in the left display and “PIN 2 HIGH”

will show in the right display. Rotate the center control until the

desired polarity is shown in the right display. The polarity changes

simultaneously with the display. Then press the L POLARITY pushbutton

again to return to the program mode starting point.

PROGRAMMING

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 64 65

Pas de commentaire

Boulder 2010 Spécifications Page 43